Gold Member Since 2011
Audited Supplier

Oven, Dry Oven, Precision Oven manufacturer / supplier in China, offering Oven, Yuelian Good Quality Universal Tensile Testing Machine with Servo Motor, China Factory Direct Economic Tensile Testing Machine with Steeper Motor and so on.

(/ )


This product is currently unavailable, but you may contact the supplier directly, for further interest.
Product Description
YL-2201-3K Oven

Physical Structure and Dimension
1\Internal dimension(w× H× D): 1500× 1500× 1500mm;
2\External dimension: According to the material object;
3\controller lies in right side of the machine, independent from electric cabinet;
4\double doors can open from the middle part, and door lock is level-type;
5\internal material: 304# stainless steel of whole machine, 1.2mm;
6\external material: Cold plate stoving varnish treatment, 1.2mm;
7\accessories: A set of cart, divided into 5 levels, material plate: Halftone;
8\heat preservation material: Imported rock wool, good effect of heat preservation;
9\sealing material: Silica gel of resistance to high temperature;
10\without live drive wheels and adjustable fixed foot;

\Temperature Control System
1\temperature control: PID digital instrument(TESHOW instrument in Taiwan), available to automatically calculate, PV/SV simultaneous display, available to set arbitrary temperature value from the normal temperature to the highest temperature by pressing the button to set;
2\timer setting: 0.1 second-999 hours(available to set hours, minutes and seconds)
Temperature counting down, time goes to the moment of cutting heating current(alarm device)
3\heat detector(K)type;
4\output: 3-32V;
5\current controller: SSR solid-state relay;
6\heating material: Heating pipe of resistance to high temperature;
7\RT-100 degrees Celsius: About 12 minutes;
8\temperature range: Normal temperature~150 degrees Celsius

1\control precision of meter: ± 1 degrees Celsius
2\displaying analysis: 1 degrees Celsius
3\temperature distribution in the oven: ± 4 degrees Celsius

Air supply system
1\force to blowing-in cycle on two sides, double air channels;
2\motor: Tailored version of long axis resistant to high temperature, two group of motor, power: 750W / 50Hz;
3\air fan: Diverse-wing worm wheel type 10.5 inches;
4\the inner part of the machine is equipped with the plate to adjust the wind direction;
5\equipped with two sets of air intakes in the rear of the machine and two sets of air outlets on the top of the machine.

Voltage: AC 380V three phases and four lines
Three-phase electric current: 110 A
Heating power: 22 KW
Total power: 24KW

Safety protection system
1\high temperature protection system: When machine is out of control because of external force, and the temperature exceeds 10 degrees more than the setting temperature, the system will automatically stop heating power supply. Thus it can protect the safety of your products and and the machines.
2\ phase lack protection\rapid insurance\leakage protection.
Send your message to this supplier
Ms. Lau
Sales Executive
To: Ms. Lau

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now